本帖最后由 newcop 于 2014-12-18 09:00 编辑
自己回覆一下現在的狀況
在SAS上詢問的結果是這樣:
JMP does not have a 3-d plot that will allow the addition of contours. However, the "Graph->Contour Profiler" platform will allow you to get contours and it offers slider bars to move the value of factors not being plotted (X3, for example). Similarly, the "Graph->Surface Plot" platform will give a 3-dimensional view of the surface and the slider bar for "X3" is also present.
To illustrate, open the attached data table and select "Graph->Contour Profiler". Enter "Pred Formula Y" as the "Y, Prediction Formula". Click "Ok". From the inverted red arrow next to "Contour Profiler", select "Contour Grid". Define the grid values, and click "Ok". Now, you can move the slider bar for "X3" to see the changing contours across the values of X3.
Or, to see the surface plot, select "Graph->Surface Plot". Enter "Pred Formula Y" in the "Columns" role. Click "Ok". Here, you can use the slider bar for "X3" to see the surface at different values of X3.
不知道是不是我表達得不好?SAS的回覆是無法做出3D的Contour Plot?只能用像附件那樣的方式去看X3的值。
但是這樣就無法得到X1、X2、X3三因子變動範圍對應到Response Y的等高線圖了。
請問一下 lsc771017 跟其他高手,是否真有辦法做出3D的Contour Plot呢?
|